Question 1

What is the exact temperature setting for the iron that won't damage the fabric?

Helio, Arc'teryx Guest Services · Accepted Answer

Hi there, thank you for reaching out. To keep your Corbel Pant Men's looking sharp, we recommend ironing on the lowest heat setting. This is typically the “synthetic” or “delicate” setting on most irons, which is designed for technical fabrics. We don’t provide an exact temperature because irons can vary by model, and using too much heat can damage performance materials. For the best results, we recommend setting your iron to the lowest setting, testing on a small hidden area first, and using a pressing cloth for extra protection. Following these steps will help maintain the pant’s clean look and technical properties. We hope this helps!

Question 2

What are in front rise and back rise measurements for the size 34 and 36?

Seymour, Arc'teryx Guest Services · Accepted Answer

Hi there, thanks for reaching out. The Corbel Pants have a front rise of 32.1 cm and a back rise of 42.7 cm in size 34-R, and a front rise of 32.7 cm and a back rise of 43.9 cm in size 36-R. We hope this helps!

Question 3

What is the inseam on size 29?

River · Accepted Answer

Hello there, the Corbel Pant has an inseam of 78.8 cm in size 29.

Question 4

What can I do to remove small fat stains without compromising the fabric performances in veilance Corbel pants?

Sophie · Accepted Answer

Hi Carlo, to remove grease/oil-type stains from Gore-Tex or any technical garments, start by dampening the affected area with water, then gently rub the stain with a dishwashing liquid agent. Use a toothbrush, sponge, or clean towel to scrub the affected area, then rinse with water every few minutes. If still affected, spot clean with a Gore-Tex-specific technical detergent like the Nu Technical Detergent. Repeat if the stain persists. Once you have treated the stain, wash the garment as per the care instructions, soaking the garment in warm water with detergent can also help.

Question 5

Hello, would you be able to give the Hem with on size 32?

Sophie · Accepted Answer

Hello, thank you for your question! While we do not have the hem width to provide, we do have the waist width and hip width measurements. They are listed below. We hope this helps!

Corbel Pant size 32-R
Waist width: 86.0 cm
Hip width: 110.5 cm

Question 6

inseam for sizes 32, 33, and 34 please?

River · Accepted Answer

Hello there, you will find below the inseam length of the Corbel Pant:

Size 32: 80.0 cm
Size 33: 80.4 cm
Size 34: 80.8 cm

Question 7

Could you please share the measurement of size 30 Corbel pant in compared to Spere LT Cargo pant? Thanks

River · Accepted Answer

Hello Archer, we would be happy to provide the measurements of these two pants for you to compare.

Corbel Pant 
Waist width: 81.0 cm
Hip width: 105.5 cm
Thigh width: 69.7 cm

Spere LT Cargo Pant
Waist width: 81.9 cm
Hip width: 114.4 cm
Thigh width: 72.8 cm

Question 8

Are these hemmed? Is it possible to make the longer, if so how much? 
I’m 6’2 and usually wear W30, but fear they are too short
Thx in advance

Austin · Accepted Answer

Hi Krestian, the Corbel Pants are laminated at the hems. The pants are only manufactured in a regular length and we do not have a tall version available. The inseam for size 30R will be 79.2cm. We have a 30-day return policy if you wish to look at the pants in person and determine if they would work out for you.

Question 9

does the waist on these pants run small, given that the model is a 29 waist but is wearing a size 32? i wear size 34 waist but i’m not sure if i should go true to size

River · Accepted Answer

Hello there, thank you for pointing that out. We’re sorry for the inconsistencies around the model size and our size chart. Our team is aware of this issue and is working on a fix. The Corbel Pant fits true to size but with our model sizes being inaccurate, we recommend you to only follow our sizing chart.

Question 10

in the product description it says - "Hem Configuration
Laminated hems create a clean finish and are constructed to allow tailoring"
In what way as a tailor is it constructed to allow for tailoring, how would I go about tailoring this piece.

Dave · Accepted Answer

Hello there,

We recommend going to a professional that specializes in technical garments for tailoring the Corbel Pant.

Thanks for reaching out, and if you have any other questions be sure to give our Customer Service Line a call or fill out a Contact Us Form.

All the best

Pantalón Corbel Hombre

Pantalón Corbel Hombre

Entrega

Detalles del producto

Pantalón Corbel Hombre

Softshell

Veilance

Descripción

Funciones y especificaciones

Cortes y tallas

Ver tabla de tallas

Materiales y cuidado

AYUDA

MI CUENTA

SEGUIR COMPRANDO

QUIÉNES SOMOS